Hack Firefox For Maximum Internet Speed-How to Speed Up Firefox Using the About:Config Menu

Tricks To Increase Firefox Internet Speed

Mozilla Firefox is one of the most preferred internet browsers used all over the world. Right from its launch many years back, till today, it has got itself to a great success and received appreciation from many internet users all over. In terms of stability, it surpasses even Google Chrome while it is considered to be the second fastest internet browser after Chrome. And with these small hacks, Firefox can win over Chrome even in terms of speed.

Increase page loading speed

Here we are going to enable pipelining. Piplelining will let Firefox make more than one requests and thus increase loading speed.

Alter the entries as follows:

Set “network.http.pipelining” to “true”

Set “network.http.proxy.pipelining” to “true”

Set “network.http.pipelining.maxrequests” to some number like 10 (This means that it will make 10 requests at once.)

Then right-click anywhere and select New-> Integer. Name it "nglayout.initialpaint.delay" and set its value to “0“.

The integer we just added will order Firefox to act after 0 seconds after receiving information from user or from the servers. In simple language, it tells Firefox to act immediately after receiving any information, thus increasing its speed.

Altering these simple settings can make Firefox a lot faster. I have tried it myself and got good results.

But the bottom line is also that it will make your internet browsing faster and in a way, it will optimize your browser but the speed limit still lies in the hands of your ISP. The bandwidth set by your ISP is the limit of optimization. 

But why not take out the most of that bandwidth? If you try out these hacks, then do comment and share your experience with us. And share these tricks with your friends too!

Fix Error 43 Code In Windows 7

Fix Error 43 Code In Windows 7

Although it may also happen on other versions ofWindows, it seems that Windows 7 is the most vulnerable one to Error 43. This is the error Windows users receive when one of the devices attached to their system stops functioning properly, possibly due to driver issues. Unfortunately, it may also trigger other errors. However, it is of utmost importance to keep in mind that error code 43 mainly shows up due to some problems with the computer hardware.

For those of you who are not so familiar about driver, it is a program that is meant to control the corresponding hardware. Driver usually comes along with the hardware you buy. Without a driver, your computer hardware won’t be able to function properly. So, when Windows detects something that seems wrong with the hardware, it will raise error code 43.

Reinstall Drivers

To solve the error, you may have to install the damaged the drivers all over again.

• To do this, you can click on Start followed by Run and then type sysdm.cpl before clicking on the OK button.
• Then, navigate to the Hardware tab System Properties and click on the button that says Device Manager.
• Double Click on the Device Type
• Here, you will have to choose and double-click on the troublesome device from the list.
• This will open up the device’s Properties dialog box. Click on Uninstall and wait for the process to finish.
• Then, you need to select scan for hardware changes which will lunch the Add Hardware wizard now reinstall or prompt yours device driver again.

Reconnect or Remove Yours Hardware Devices

Yet, if that does not work, you may need to open up the case of your computer. This way, you will be able to unplug the device from your system. However, of course, you will have to turn off your computer and make sure that it is not connected to the power outlets at all prior to opening up the case. Then, when you have physically unplugged the device, try plugging it back in and make sure it is not loose. This may trick Windows into considering that you have just attached a new device and it may then install a fresh driver for the device.

Clean your Registry

If that still does not work, you may have to do something about your registry. For your information, it is the registry that stores all information and settings with regards to your Windows operating system. So, there is a potential that error code 43 you are encountering is due to some false information in the registry. To fix it, you may need to download and install a registry cleaner that will solve your problem automatically. Fortunately, you can find loads of them on the internet today.

How to fix Code 39 error with DVD/CD-ROM drives in Windows XP or Vista

How to fix Code 39 error with DVD/CD-ROM drives in Windows XP or Vista

I was fixing a computer the other day and ran across the following error in Device Manager on the CD-ROM drive. "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. "(Code 39)" Because of this error, the drive did not show up in My Computer and the customer was unable to burn CDs or read any CDs.

I uninstalled the drive from Device Manager, rebooted the computer, and the problem remained, so obviously it appeared to be a registry issue that I would have to solve. If you are receiving this Code 39 error and your CD or DVD drive is missing and has a yellow exclamation mark in Device Manager, I hope this information is useful.

To solve this Code 39 error, follow these instructions: 

NOTE: After removing these registry keys and rebooting, it may be necessary to reinstall any CD or DVD recording applications. 

1.) Close all open programs

2.) Click on Start, Run, and type REGEDIT and press Enter 

3.) Click on the plus signs (+) next to the following folders 

• HKEY_LOCAL_MACHINE SYSTEM 
• CurrentControlSet 
• Control
• Class {4D36E965-E325-11CE-BFC1-08002BE10318} 

4.) This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following  names in the right hand column. 

• UpperFilters 
• LowerFilters
• UpperFilters.bak 
• LowerFilters.bak 

5.)If any of the above keys shown in step 4 are listed, right-click on them and choose Delete 

6.) After deleting the keys, close the Registry Editor 

7.) Reboot your computer 

8.) Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. 

How to Start Windows in Safe Mode

How to Start Windows in Safe Mode

Many times in order to remove a piece of spyware or for troubleshooting and diagnostic purposes, you'll have to start Windows in Safe Mode. While in Safe Mode, only specific programs and files needed to run the operating system are loaded. Some functions, such as connecting to the Internet, will not be active in Safe Mode and a standard video driver will be loaded causing a washed out look and a possible change in resolution. There are currently 3 ways to start Safe Mode: Normal Safe Mode, Safe Mode with Networking (normally the Internet will work in this mode), and Safe Mode with Command Prompt.

However, since only the essential programs and files are loaded in Safe Mode, this allows us to remove some spyware, adware, viruses and such that cannot be removed in Normal Mode. Follow the instructions below to Start Safe Mode for your specific version of Windows. If you are trying to delete a file that is not allowing you to delete it (even in Safe Mode), you may want to read my article on How to Delete an Undeletable File.

Windows 7

• Turn the computer on or Restart the computer.
• Start tapping the F8 key. The Windows Advanced Boot Options Menu appears. If you begin tapping the F8 key too soon, some computers display a "keyboard error" message. To resolve this, restart the computer and try again.
• Ensure that the Safe mode option is selected, not Repair Your Computer
• Press Enter. The computer then begins to start in Safe mode.
• When you are finished with troubleshooting, close all programs and restart the computer as you normally would

Windows Vista

Windows Vista is similar to Windows XP for starting in Safe Mode.

• Turn the computer on or Restart the computer
• Start tapping the F8 key. The Windows Advanced Boot Options Menu appears. If you begin tapping the F8 key too soon, some computers display a "keyboard error" message. To resolve this, restart the computer and try again.
• Ensure that the Safe mode option is selected (the top option)
• Press Enter. The computer then begins to start in Safe mode.
• When you are finished with troubleshooting, close all programs and restart the computer as you normally would.

Windows XP

If Windows XP is the only operating system installed on your computer, booting into Safe Mode with these instructions.

• If the computer is running, shut down Windows, and then turn off the power
• Wait 30 seconds, and then turn the computer on.
• Start tapping the F8 key. The Windows Advanced Options Menu appears. If you begin tapping the F8 key too soon, some computers display a "keyboard error" message. To resolve this, restart the computer and try again.
• Ensure that the Safe mode option is selected.
• Press Enter. The computer then begins to start in Safe mode.
• When you are finished with all troubleshooting, close all programs and restart the computer as you normally would.

Beep Error Codes on Award BIOS

Beep Error Codes on Award BIOS

Unfortunately there are many versions of the Award BIOS, and they are supported not by one company, but by the motherboard maker. Award's website states "Award Software software products are sold to a board or system manufacturer ("hardware vendor"), who customizes them further before selling the system. Award Software cannot supply upgrades for a BIOS that has been subsequently modified by hardware vendors." 

To make matters worse, Award BIOS merged with Phoenix Technologies in 1998. The hardware vendor that designed your system is the best source for bug fixes and answers about your system, but after so many mergers the Award BIOS is a difficult one to support.

Beep Error Codes on Phoenix BIOS

Beep Error Codes on Phoenix BIOS

These audio codes are a little more detailed then the AMI codes. This BIOS emits three sets of beeps. For example, 1 -pause- 3 -pause 3 -pause. This is a 1-3-3 combo and each set of beeps is separated by a brief pause. Listen to this sequence of sounds, count them, and reboot and count again if you have to.

1-1-3	Your computer can't read the configuration info stored in the CMOS. Replace the motherboard.
1-1-4	Your BIOS needs to be replaced.
1-2-1	You have a bad timer chip on the motherboard. You need a new motherboard.
1-2-2	The motherboard is bad.
1-2-3	The motherboard is bad.
1-3-1	You'll need to replace the motherboard.
1-3-3	You'll need to replace the motherboard.
1-3-4	The motherboard is bad.
1-4-1	The motherboard is bad.
1-4-2	Some of your memory is bad.
2-_-_	Any combo of beeps after two means that some of your memory is bad, and unless you want to get real technical, you should probably have the guys in the lab coats test the memory for you. Take it to the shop.
3-1-_	One of the chips on your motherboard is broken. You'll likely need to get another board.
3-2-4	One of the chips on your motherboard that checks the keyboard is broken. You'll likely need to get another board.
3-3-4	Your computer can't find the video card. Is it there? If so, try swapping it with another one and see if it works.
3-4-_	Your video card isn't working. You'll need to replace it.
4-2-1	There's a bad chip on the motherboard. You need to buy another board.
4-2-2	First check the keyboard for problems. If nothing, you have a bad motherboard.
4-2-3	Same as 4-2-2.
4-2-4	One of the cards is bad. Try yanking out the cards one by one to isolate the culprit. Replace the bad one. The last possibility is to buy another motherboard.
4-3-1	Replace the motherboard.
4-3-2	See 4-3-1
4-3-3	See 4-3-1
4-3-4	Time of day clock failure. Try running the setup program that comes with the computer. Check the date and time. If that doesn't work, replace the battery. If that doesn't work, replace the power supply. You may have to replace the motherboard, but that is rare.
4-4-1	Your serial ports are acting up. Reseat, or replace, the I/O card. If the I/O is on the motherboard itself, disable them with a jumper (consult your manual to know which one) and then add an I/O card.
4-4-2	See 4-4-1, but this time is your Parallel port that's acting up.
4-4-3	You math coprocessor is having problems. Run a test program to double-check it. If it is indeed bad, disable it, or replace it.
Low 1-1-2	Your motherboard is having problems
Low 1-1-3	This is an Extended CMOS RAM problem, check your motherboard battery, and motherboard.

Beep Error Codes on Standard Original IBM BIOS

Beep Error Codes on Standard Original IBM BIOS

1 short beep	Normal POST - system is ok
2 short beeps	POST Error - error code shown on screen
No beep	Power supply or system board problem
Continuous beep	Power supply, system board, or keyboard problem
Repeating short beeps	Power supply or system board problem
1 long, 1 short beep	System board problem
1 long, 2 short beeps	Display adapter problem (MDA, CGA)
1 long, 3 short beeps	Enhanced Graphics Adapter (EGA)
3 long beeps	3270 keyboard card

IBM POST Diagnostic Code Descriptions

100 - 199	System Board
200 - 299	Memory
300 - 399	Keyboard
400 - 499	Monochrome Display
500 - 599	Color/Graphics Display
600 - 699	Floppy-disk drive and/or Adapter
700 - 799	Math Coprocessor
900 - 999	Parallel Printer Port
1000 - 1099	Alternate Printer Adapter
1100 - 1299	Asynchronous Communication Device, Adapter, or Port
1300 - 1399	Game Port
1400 - 1499	Color/Graphics Printer
1500 - 1599	Synchronous Communication Device, Adapter, or Port
1700 - 1799	Hard Drive and/or Adapter
1800 - 1899	Expansion Unit (XT)
2000 - 2199	Bisynchronous Communication Adapter
2400 - 2599	EGA system-board Video (MCA)
3000 - 3199	LAN Adapter
4800 - 4999	Internal Modem
7000 - 7099	Phoenix BIOS Chips
7300 - 7399	3.5" Disk Drive
8900 - 8999	MIDI Adapter
11200 - 11299	SCSI Adapter
21000 - 21099	SCSI Fixed Disk and Controller
21500 - 21599	SCSI CD-ROM System

Disabling Low Ink Level Notification for Canon IP and MP

Disabling Low Ink Level Notification for Canon IP and MP

The reset method work for canon printers that using PG-40 and CL-41 cartridges. After doing this reset method your printer will not display low ink notification anymore and will not show error code “E4″ or “E5″.
Here how, the method to reset ink level notification:

1. Push “resume” for 5 seconds for canon IPXXXX. For canon MPXXX you must enter to service mode.
2. Push Power switch then remove power cord.
3. Insert plug power cord while pressing “power switch” at the same time.
4. Push Start/reset by step 2 continue Wait display shown “0″
5. Push + change display from “0″ to “1″
6. Push color button 2 times
7. Push Power switch again , Printer will print 1 page
8. Open cover
9. Unplug power cord
10. Take out ink cartridge #40 and #41
11. Insert plug again
12. Push power switch
13. Open cover (scan cover)
14. Insert ink cartridge #40 and #41 again

Enter to service mode for canon MPXXX

Reveal Hidden Windows 7 Wallpapers

Reveal Hidden Windows 7 Wallpapers

When installing Windows 7, you will always get asked what country you are from. Then, based on what you choose, Windows will give you wallpapers to suit your choice. If you choose United States, you will most likely get some scenic views such as the eye candy wallpaper displaying the national park and the outdoors treatment you can possibly find in the US. However, there are actually some other pieces of wallpapers that you can reveal.

These said wallpapers are stored in the C:\Windows\Globalization\MCT folder. You may need to unhide the folder if it is hidden.

To do that, you may want to push Windows key + R and type into run box %systemroot%/Globalization/MCT. If this doesn’t work click in the window Organize button, and select Folder and search options now select View tab there, you can choose to show or hide files and folders on the View tab.

Now first uncheck Hide protected operating system files and second click on Show hidden files, folders, and drivers apply and click ok, and you are done!

In the folder, you may see a few subfolders named ZA (for South Africa), US (United States), GB (Great Britain), CA (Canada) and AU (Australia). Inside each of those folders, you may find a subfolder labeled as Theme. When you get into the subfolder and run the file ending in .theme extension, you will activate the corresponding set of visual theme. You can then use this theme by right clicking on your Windows desktop and choose Personalization. You will see new themes under My Themes. Now just double click on the theme and you’re done!

However, if you find that the themes available in those folders are not quite attractive, you may want to get some additional themes from the Microsoft website. In addition to that, there is also a third party website which is pretty interesting to visit. The website author has compiled loads of wallpapers you can use for your Windows operating system.

Windows Vista Cannot Connect To The Printer. Access is Denied

Windows Vista Cannot Connect To The Printer. Access is Denied

One of the more interesting errors in Windows Vista happens when you try to connect to a shared network printer. Most of the time you'll receive an "Access is Denied" error when trying to connect even though you can see the printer on the network and everything else is working properly.

Everything else on the network appears to work properly, shared files, internet access, etc. However, you just cannot access the ahared printer and print. The solution is to add the printer as a local printer and then try printing.

Follow the directions below to accomplish this.

1. Go into Control Panel
2. Underneath the Hardware and Sound category, click on Printer
3. Click on Add a printer from the top menu
4. Click on Add a Local Printer
5. Choose Create a New Port with type of port remaining Local Port, then click Next
6. In the Port Name box type the path to the printer you wish to connect to and Click Ok  Ex. \\mycomputer\myprinter
7. In the Install Printer Driver screen, select your printer from the list or choose Have Disk and find the location of the printer drivers on the computer then click Next and then click Finish.
8. You should now see the printer installed in the Printers window.
9. Right-click on the printer and click Properties
10. On the General tab, click Print Test Page to test the printer.

You should now be able to printer from Windows Vista to this networked printer with any problems.

How to Fix wireless network connection problems in Windows Vista

How to Fix wireless network connection problems in Windows Vista

Wireless networking makes life a lot easier — at least, that’s the theory. But connecting to a wireless network can be troublesome, though the solution is often fairly simple. By following these six steps you will be able to identify and solve the most common problems quickly and easily.

One thing to make sure of before starting is that wireless networking is switched on. On some computers youmay need to press a button or flick a switch before the PC can connect — it varies from PC to PC, but look for something marked Wireless, Wifi, 802.11 or with an antenna or radio waves (on Dell computers, hold down Fn and press F2). If you’re still having connection problems after all your equipment has been checked, then follow our advice to fix the problem.

Step 1

The first port of call when checking for wireless network problems is the wireless network icon in the Notification Area, the small collection of icons at the bottom-right of the screen. The icon is a picture of two computer monitors, and if you have a working connection (or if the computer thinks you do) it will be partly covered by a blue-green globe. Hover your mouse over the icon (move the pointer over it but don’t click anything) and a small box will appear showing the strength of the wireless signal and what kind of access is available. If you can’t see the globe, or if you can but there’s still no network connection, the next step is to right-click the icon and select ‘Diagnose and repair’.

Step 2

Once you’ve clicked ‘Diagnose and repair’ the computer will go through a process of figuring out what kind of connection you’re trying to make and attempt to reconnect to it. If the problem is temporary, you might find that it fixes itself at this point. Otherwise a window will appear with further options. Depending on the problem, you may be offered the option of trying to connect again or changing the wireless security key (see Step 3). If there’s no response from the network, you could try connecting with a network cable and logging into the router’s control panel to diagnose the fault. To do so, open a web browser and type the router’s address. It will usually be 192.168.0.1 or 192.168.1.1, but details for this and the router’s administrator password will be in its manual.

Step 3

Home networks should have some security set up (on the router or access point). A good option is WPA or WPA2 encryption (either or both will appear in the router’s setup page). WEP security is more widely used but is less secure. You will be prompted to enter a ‘key’, which can be any phrase of text. Remember this, as Vista will prompt you to enter it when you want to connect to the network. If you’re using a paid-for public hotspot there may be no security, but you will need to log on to the network. Once connected, open a web browser and you will be directed to a page where you can pay or log in, if you have an account.

Step 4

If you can’t find the right name in the list of available wireless networks, it may be that the one to which you’re trying to connect has been hidden to prevent unauthorised access. To get to it, select Unnamed Network from the list and click Connect. You will be prompted to type the name of the network — get this fromthe owner of the network. Windows will then try to connect — if you need a passphrase or security key to access it, you’ll be prompted for that. Type it in and click Connect. A common problem here is mistyping of keys — tick the ‘Display characters’ box to be able to see what you’re typing, or copy and paste it from an email or text document.

Step 5

If Windows can’t find any networks and your wireless facility is switched on (see introduction), check that the hardware is working. Click Start, then Control Panel, then Network and Sharing Center, then Manage Wireless Connections. Rightclick the wireless connection and select Enable. If that doesn’t work, click Start and type device, then click Device Manager when it appears above. In Device Manager, double-click Network Adapters to expand it, and look for your wireless network adapter. If it’s not there, make sure it’s physically connected. Check the fitting; if it’s a USB device try it in another port. A yellow exclamation mark in Device Managermeans it is not working — try installing the latest drivers from the maker’s website. A red X means it has been disabled — right-click it and select Enable.

Step 6

Wireless networks can work over a number of ‘channels’. You can set the channel when you set up the network (on your router or wireless access point). If you live in a city with lots of wireless networks around you, choose a channel few others are using to minimise interference. Log in to your router (instructions vary between manufacturers) and choose another channel for the wireless connection (you’ll need to reconnect any computers connected to it) and see if performance improves. The placement of the wireless router is also important. If it has ‘line of sight’ to the computer you’ll get a better signal; if not, try to place it so there are fewer obstacles in the way.

Windows 7 Hidden Gems –Additional functionality

I’ve been living with Windows 7 for a good few months now and in that time have discovered a couple of little ‘hidden gems’ which I wanted to share with you:

Aero ShakeIn Windows 7,when you click on the title bar of any window and shake it every other open window gets minimised straight back in to your taskbar,reducing clutter on your screen.  This allows you to focus on the one window and then when ready shake it again and the other windows will reappear.

There are additional Aero user interface related features which make a welcome debut.  These include Aero Peek which allows you to immediately see what’s going on in an application just by hovering over the icon in the task bar and Aero Snap which quickly allows you to rearrange your desktop by slamming any open window against the left,right or top side of your screen;try it!

Sticky Notes

Proof,if needed,that some of the simplest applications make the largest differences to the end user experience.  One of the most commonly used applications on my PC used to be the incredibly simple ‘notepad’ as I find that my working life works a lot better if I simplify everything down in to lists.

Rather than jotting notes on random pieces of paper that will almost certainly get lost throughout the day I used to dump everything in notepad and ensure that every line was eventually cleared so I was left with a blank page before I went home.

Sticky notes have a similar application.  To get started click on the start menu and type in ‘sticky’ and begin typing tasks for the day or things to remember in to little post it notes that stick to your screen.  When complete either close or minimise the application to get back to the job in hand,safe in the knowledge that once Sticky Notes are reopened,these tasks will reappear exactly as you left them.  When a task has been completed or the note simply isn’t needed,it can be deleted with one click of the mouse.

Improved CalculatorWindows 7 calculator has improved considerably;now rather than being an arithmetic only affair,it can be operated in four modes –Standard,Scientific,Programmer and Statistical.  It can also perform unit conversion,for example grams to ounces,metres to feet and Celsius to Fahrenheit along with a couple of unexpected features such as the ability to calculate the number of days between two dates or the value of your mortgage repayment.   Surely in the next version of Windows the calculator application will finally gain graphical capabilities.

Windows Disk Image Burner

For some time now the preferred method of copying and storing CD’s and DVD’s has been by using an ISO file;a single image which includes the contents of an entire disk.  Reading these files used to require a specific application (the likes of which I’ve covered previously in Click) but every version of Windows 7 now includes support for these straight out the box;simply double click on the ISO file that you wish to burn,insert a blank CD or DVD and you’re done.

Repairing hard drive with CHKDSK

Repairing hard drive with CHKDSK

If your disk partitions start fail, slow down, began to appear remarks errors like “access to the folder is locked,” and similar messages as well as hard drives have no issue “human” sounds like the rustling, squeaking, it is again possible to improve a team that can run CHKDSK not only from the Recovery Console as described in this article, but in the console windows, for this do the following :

1. Open menu Start> All Programs> Accessories> Command Prompt

2. If you want to check the system drive (C: ), then simply enter in the window that appears chkdsk / r and press the Enter

3. After that appears (Unable to run CHKDSK, because the volume is in use by another process. Should we check for this volume at the next boot? [Y <yes> / N <no>]) keyboard latin letter Y and hit Enter

4. We are told that (This volume will be checked at the next reboot.) Restart the computer

5. When the system boots will be a blue box with a timer, not why not click as soon as the timer reaches zero, start checking the disk

6. Once validated, the computer restarts itself after Windows boot partition error to be corrected

7. If you act up, not only the system drive and another partition then again run the command line and letter of the section to be tested in this way E: or D: that is, by analogy, we substitute the appropriate letter and you press Enter (the letter section can be found in My computer.

8. Enter the chkdsk / r and press Enter (The complete string would look like – Drive Letter: > chkdsk / R )

9. A message appears (Unable to run Chkdsk on the volume, because volume is in use by another process. To run Chkdsk, should first turn off the volume. All opened handles volumes will Incorrect. Confirmation of the volume to dismount [Y <yes> / N <No >]) keyboard Latin letter Y and press the Enter

10. Will the process of checking and repairing hard drive errors, after it can close the console window (the interest rate may reach a certain level and fall back, don’t worry this is normal)

How to increase disk space after Windows 7 SP1 installation

How to increase disk space after Windows 7 SP1 installation

Windows 7 SP1 will make copies of system files during installation, which will reduce disk space. By removing the copy of the file system, we’ll get one gains valuable disk space. Here is How to increase disk space after Windows 7 SP1 installation :

Click the Windows icon, then select “All Programs ➞ Accessories ➞ System Tools ➞ Disk Cleanup“. In the next window, click “OK“. Disk Cleanup will calculate how much space can be cleaned on drive C.

In the next window “Clean up system files” click. Next, the Disk Cleanup start again, this time with administrator privileges. Click in the box for the Drive Select “OK“. This program will calculate how much space can be cleaned on drive C.

In the next window, put a check in front of “service pack backup file” and click “OK“.
It takes several minutes to clean up. By the way : Normally you will only increase about 530 MB of hard disk space (32-bit SP1) or 920 MB (64-bit SP1). In the editorial, significantly higher values are measured, ie, up to about 2 GB.

Find Windows 7 Keys for all Versions

Find Windows 7 Keys for all Versions

If you missed your windows 7 activation Key  but still confuse about it. You can discover  quickly with out registering for your Windows seven DVD ever again and looking in the internet. Actually you can get the cd key of this version along with several various other versions of your Windows 7. This is how to find your windows 7 keys  :

1.  Extract the Windows 7 ISO.  a UDF File format  would be needing additional software such as CDExtractor or ISoBuster to complete the task.
2. Inside the DVD root directory you will find a directory sources….open it up.
3. Discover a settings file product.ini
4. Open the product.ini file
5. Browse until the end and you’ll discover number of various windows 7 keys  versions like Starter, Professional, Ultimate, and more…

Windows 7 ALT + Tab wont stay on top or stick

Windows 7 ALT + Tab wont stay on top or stick

When pressing ALT + Tab in Windows 7, you may encounter an issue where the shown open windows will not remain open or stay on top of all other windows. This can be extremely frustrating for anyone who uses ALT + Tab frequently while in Windows. To resolve this issue follow the below steps.

1. Click the Start orb and in the Search box type advanced system settings and press enter.
2. In the System Properties window under the Advanced tab click the Settings button.
3. In the Performance Options window, as shown in the picture to the right uncheck the Enable Aero Peek box.
4. Click Apply and then Ok and your ALT + Tab should work as expected.

Windows 7 Blue Screen Problems and How To Fix This Error

Windows 7 Blue Screen Problems and How To Fix This Error

The blue screen error — also known as Blue Screen of Death (BSOD) — is pretty common on all versions of Windows, be it the oldest or even the newest one. This error can get really annoying. It can even block users from logging onto their Windows operating system. As a result, the system is seemingly impossible to use at all. But what PC users should keep in mind is that they are not the only people to experience this particular problem. As mentioned earlier, it has been pretty common and, fortunately, people have found out some workaround methods that may prove to be quite effective in solving the BSOD.

BSOD Triggers

However, it is important to understand what may have triggered the BSOD. Most of the time, BSOD can be triggered by a recent change in either the computer’s hardware or software. For example, a newly installed hardware will most likely need proper driver files in order to work properly. Although it is true that the drivers are normally provided with the hardware, there are times when the driver files may happen to be corrupted. Another possibility is that one or more of the applications or software installed on the system encounters conflicts. Also, taking into accounts that drivers are software as well, they may just as well trigger the conflicts.

Yet, if the problem is not on the software, chances are there is something wrong with the hardware. It may have been damaged or installed improperly. In this case, it is always a good idea to try using the hardware in question on another computer to see if it works.

How to Solve BSOD

There are several ways that may well solve the blue screen error. The first way is to uninstall the drivers and try to install the latest drivers from the website of the hardware vendor. Secondly, it is worth trying to uninstall the device using the Device Manager utility. Last but not least, System Restore utility built into Windows may also be pretty helpful.

However, some people may wonder how they can run all these utilities if they cannot even log onto Windows. Well, the Safe Mode provided with each version of Windows is normally the answer to this. When the computer is trying to boot after passing the self diagnosis process, constantly hitting the F8 key will usually display a list of advanced Windows options, one of which is the Safe Mode. Choosing it will enable users to log onto the system yet with limited capabilities. However, it is enough to solve the BSOD.

So, at this stage, it is possible to use any of the 3 possible methods mentioned earlier. The first is to uninstall the drivers. Yet, one thing that is important to keep in mind that Windows tends to leave junks behind after some things are uninstalled. Therefore, it may be necessary to launch the Registry Cleaners to clean up the rest of the troublesome drivers. Manual registry edition is not advisable for newbies because Windows Registry it`s such delicate thing that, you can easily damage Windows functionality if you’re not know what are you doing!

The second method is to uninstall the device using Device Management utility. This utility can be launched by typing “devmgmt.msc” in the command line. Once the utility window shows up, simply right click on the troublesome device and choose Uninstall.

Lastly, there is System Restore. However, this method won’t be useful unless this feature is kept active all the time. Some advanced PC users may disable it to save spaces and processing time of applications. System Restore can be accessed by clicking the Start button and then choosing Programs followed by Accessories and System Tools. Users simply need to choose a date before they install the new conflicting hardware or software and Windows will revert everything to that date. As a result, the operating system should now be working normally again.

1. Go to Start → Programs → Accessories → System Tools → System Restore

Windows 8 Tablet and its Many Implications for Microsoft

Windows 8 Tablet and its Many Implications for Microsoft

The Windows 8 tablet will be considered, to some, an inevitable breaking point for Windows. This tool could either sustain Windows’ success or, by contrast, push the company down considerably in the ranks.

At its core, Windows 8 is simply an operating system, one that works with touch as well as a mouse and keyboard, with access to apps, the web, etc. It’s safe to say that Windows already has a huge following, and the loyal, PC traditionalists are very likely to purchase a tablet as the operating system will provide legacy support for all Windows 8 apps and accessories. A tablet could seamlessly integrate into their current technology network, and will also operate in sync with the gadgetry and technology that follows. For a windows fan, it’s a no-brainer. Additionally, Windows has the “in” with big-hitters like HP and Dell, who have already announced that they will release tablets with Windows 8.

However, there are a couple of factors that could make or break the tablet. For one, price. On average, people have said they’d be willing to shell out about $300 for a Windows tablet, considerably more than the extremely cost affective Kindle Fire. Additionally “hype factor” may play a roll in Windows tablet sales. In the first quarter of 2011, about 46% of U.S. consumers were at the edge of their seat, eagerly waiting for the release of the Windows 8 tablet. However, in the passing months, this huge percentile nearly halved to a meager 25%.

With so many factors, there’s really only one way to dictate the Windows 8 tablet’s success: wait.

Windows 8 : Sysinternals Live Executes Sysinternals Tools Directly from the Web

Windows 8 : Sysinternals Live Executes Sysinternals Tools Directly from the Web

In the previous guide, you learned about the Sysinternals tools. In this guide, you’ll learn how to launch Sysinternals tools from the web. This can save valuable time and give you the tools you need when you need them i.e. you’re at a friends house and they’re asking for help with their PC.

Launching Sysinternals tools from the command line/Run dialog is easy. First, you’ll need the list of names of the Sysinternals tools, which can be found here: live.sysinternals.com

Once you have the name of the tool,  launch the Run dialog (Winkey+R) and type the following:

 \\live.sysinternals.com\tools\toolname.exe

Replace toolname.exe with the name of the tool you want to run. For example, if you want to run Process Explorer, enter the following command:

 \\live.sysinternals.com\tools\procexp.exe

Give it a few moments and you’ll be prompted to run the tool for which you executed the command:

For most tools, you are asked to accept the terms of the software and then you’ll be up and running:

That’s it. Now you can access Sysinternals tools from any Windows PC  with an internet connection—anywhere in the world. 

Create a Windows 7 Live CD [How To]

Create a Windows 7 Live CD [How To]

About a year ago I set out to create me a Windows 7 live CD. Finally, I am able to present you with the How-To. But before we get into that, let’s review what a LIVE CD is.

A Live CD is an actual Windows Installation that you carry with you on a USB Flash Drive or CD/DVD. The Windows Installation is portable, meaning that you can have your own windows running on any PC you encounter. The Live CDs are most commonly used to repair computers that have crashed or to rescue data from a hard drive before doing a fresh installation. The great thing about a Live CD is that it

does not alter anything on the computer you use (almost like a sandbox). You boot the computer as if it is your own (from the CD/DVD or USB). You can pre-install all the software you like, making it available no matter where you are. Sort of a Laptop, but without the hardware.

In the Linux World it has been around for years ( and as Windows XP). But Windows 7, well it’s been a longer road. You have of course been able to download illegal Windows Live Copies on the net for a while – but now at last I am able to show you have to create your own legal copy (for your personal use), provided you own a Windows Setup Disk and license.

Enough chit chat, let’s get on with it…

The overview

In order to create a Live CD from Windows 7, we need to download a utility called WinBuilder (download link at the end of this article). We also need a whole bunch of scripts to program our Live CD. Luckily there are hundreds of ready scripts available for us to download, so you don’t have to be a geek to get it working.  I have a set of working scripts available to you, but first, let’s look for those custom ones. Go ahead and download the WinBuilder application.

NOTE!

DO NOT place Winbuilder on your Desktop or other “User Related” folders.

1. Upon first launch, WinBuilder will open the Download Script Page, which allows you to browse through lots of available projects. The first thing we do is updating the servers list and choose the “winPE 7″ project. This is a beginners project, with most common scripts you need to get started. More scripts and functions may be added later on.
2. Choose “Complete Set” from the dialogue, and click Download.
3. Once a project has been downloaded, close the Download page or reboot WinBuilder (you can always go back and download other scripts and add ons by clicking on the Download Button in the main window). Should you come across a script you would like to use, it can also be added manually by copying it into the WebBuilder Project folder.
4. If you are a curious geek, who like to tweak everything, go ahead and look through the downloaded scripts, tweak everything from windows theme, wallpaper, sounds etc.

Running the scripts

1. Once a project has been chosen and tweaked, you need your Windows Setup Disk, as the scripts will copy everything they need from it.
2. Click The Source Button, and choose the path for the Setup Disk.
3. Next, Expand the Finalize Folder in the script overview window and choose the apropriate settings (Create ISO, copy to USB-drive etc.).
4. Then, click the PLAY button and wait while WinBuilder does the rest.